Hi folks,
I have Profire 2626 and Octane and both use the same conection 1/8 plug + cord type for power supply, but the 2626 need 12DC and Octane 18v AC. Fail.
I conected 18V of the Octane into the 2626. Two ICs burned.
After accident I tryed the luck and the Profire software talked OK with Protools. All commands OK via software, but don't work when I try audio analogs Inputs and Outputs.
I believe the simple replace the ICs can to solve the problem, but just need see identification on IC body. They are charred.
I just need a photo of the section force to identify like attachment image.
The IC name is U940 and Q940 on the circuit board.
Could any 2626 owner send me the IC picture of power section?
Greetings from Brazil for all.
Regards
Afonso Mesquita
IMG_3443.jpg
I have Profire 2626 and Octane and both use the same conection 1/8 plug + cord type for power supply, but the 2626 need 12DC and Octane 18v AC. Fail.
I conected 18V of the Octane into the 2626. Two ICs burned.
After accident I tryed the luck and the Profire software talked OK with Protools. All commands OK via software, but don't work when I try audio analogs Inputs and Outputs.
I believe the simple replace the ICs can to solve the problem, but just need see identification on IC body. They are charred.
I just need a photo of the section force to identify like attachment image.
The IC name is U940 and Q940 on the circuit board.
Could any 2626 owner send me the IC picture of power section?
Greetings from Brazil for all.
Regards
Afonso Mesquita
IMG_3443.jpg