Plug Zalman ZM-MIC1 (mini-jack 3.5) in M-AUDIO ProFire 610
hello, I would like to plug a mic Zalman ZM-MIC1 (mini-jack 3.5) into the ProFire 610 (XLR/TS input). Is this possible? what adaptater to use? Here are the links for the mic and the sound card:...
View ArticleLatency (PCI vs PCIe)
I've owned my M-audio Firewire Solo interface for years. I use Cubase 5 for mixing. Now that I am recording my guitars through direct input with amp simulation plugins, I have found my latency to be...
View ArticleExpress card for Lenovo T60 -- HELPME TO CHOSE!!!
Hi guys, my lenovo t60 with 1Gb of Ram must work with profire 610 trough the express card, but I dont have it. So I need to buy it: I know that it will works with TI chipset, but can someone suggest to...
View ArticleCan't see controls in Project mix control panel
Hi all, I have just updated to win7 64bit and although my project mix is connected and shows up in my DAW, I cannot get the control panel to display properly. The window opens but it is completely...
View ArticleBSOD profire
I would just like to say this. The response I got from support is that they don't support imacs running windows on bootcamp. this is what was said to me, " I can't help you if you insist on using an...
View ArticleProfire 2626 does not allow multiple output control?
I have had a Firewire 410 for years and could control multiple pairs of monitors volume from the control panel. I just bought a Profire 2626 and it does not seem to be possible. Does anyone know for...
View ArticleWhere's Our Working Driver?
I would like to know approximately how much longer we need to wait for a driver which works with the Mountain Lion OSX. I will not partition my drive and buy an operating system. I would like to put my...
View ArticleFirewire Solo audio routing
Hello everyone! I am new to this forum and hope that that you could solve my conundrum. I have 2 computers: a mac mini (mid 2011 if memory serves me correctly) and a PC that I use for games. I also...
View ArticleProfire 610 Windows 7 SP1 problems!
Hi, hope someone can help me! Im getting clips and pops from my profire Its really annoying!. When i had W7 i worked fine, then I move to W7 SP1(after a format) and the problems started, sometimes when...
View ArticleI need the solution with Blue Screen mafw.sys file - Windows XP SP3
I'm having the problem that many users are also. Blue screen error in the file and mafw.sys. I already did all the procedures that I found searching the internet. The memories are OK. Were checked with...
View ArticleFirewire 1814 beta drivers
I have been trying to access the beta drivers section but it doesn't seem to be available anymore. Where is the place to download beta drivers? I am in need of the 1.10.5 drivers. It seems as if avid...
View ArticleFireWire 410 and Logic Pro 9 "ringmodulator-noise"
Hi I bought a FireWire 410 and tried it with my Logic Pro 9 and GarageBand. In both cases, a noise starts to sound after approx. 2 minutes. This problem doesn't occur when I play my bass through the...
View ArticleProFire 2626 "the device can not be started"
Hello, worked two years, eager not know, yesterday turned off the map, moved from table to table, he put back on it. Little blue flame burns like a living as usual, but a computer does not see any at...
View ArticleIntermittent connection between soundcard and PC on Windows 7 Professional
Some few months back I've acquired a faster PC with a Window 7 Professional OS 64 bit, Intel i7-2600 3.40 Ghz processor and 8GB Ram, an Asus motherboard P8Z77-V LX. To be able to use my Profire 2626, I...
View Articleprofire2626+FW410?
Hi everyone! I have a profire2626 and I wanted to add more outputs to my system... I can buy a FW 410, but... ¿How I have to connect them? -Linking them via FW, is not possible, no? -Using the ADAT?...
View Article410 EMERGENCY, no signal or sound
i just bought a used 410 from ebay. I powered through firewire and have a solid blue light. I have a TRS coming out of output 1 going into the line TRS of a mackie 808M amp/ mixer. When I tried running...
View ArticleProfire 2626 has stopped producing any audio!!!
Hi Guys, My Profire 2626 has stopped giving any audio out through monitors, headphone outputs and when I plug in a microphone to the XLR inputs the input indicator lights don't flicker with sound...
View ArticleClik here to view.
Mic doesn't give input signal ...
Hi, I'm using a mic with XLR plug, which I connected to the front of my FireWire 410. I tested all different switches of the mic and of the FireWire 410, but no signal is coming ... sometimes I see a...
View ArticleProfire 610 - 24/192 with Logic Pro 9 - Help
Hi, Recently started recoding song of my songs using Logic Pro 9 going thru my Profire 610. My problems is whenever I go to settings to change sample rate to 192 kHz as soon as I open Logic it puts the...
View Article2626 - How to get back to "host-mode" on OSX ???
How to set Profire back to host mode? I'm using a 2626 and always used it as main interface so i was able to control everything with the setup-controlpanel. last time it was needed for a recording in...
View Article